Ningguo Kingcool Import and Export Co., Ltd is a China Refrigeration Parts-Installation Material Manufacturers supplying the consumable and finishing items that complete a refrigeration or air conditioning installation: AC cable ties tape and air conditioning insulation tube. We combine industry and trade, producing metalized polypropylene film capacitors on high-precision slitting and winding equipment while acting as a one-stop source for air conditioner and refrigerator accessories.
Installation material is the layer of the bill of materials that decides whether a finished line looks professional, holds its insulation value and passes handover inspection. Our range is built for contractors, distributors and OEM assembly lines that need these items in repeatable quality alongside the rest of their refrigeration parts order.
What We Supply in This Category
Two product families sit under installation material, and both are stocked as standard items rather than made-to-order specials. They are ordered together with copper tube, brass and copper fittings, condensate drain pumps and control valves so that a project receives one consolidated shipment.
AC Cable Ties Tape
PVC non-adhesive tape manufactured from plasticized polyvinyl material, used to bind and protect refrigerant line sets, cable runs and pipe insulation joints.
- Non-adhesive wrap that does not bond to the pipe surface
- Suited to line-set bundling and cable dressing
- Supplied in roll form for site and workshop use
Insulation Tube for Air Conditioning
Closed-cell insulation tube for refrigerant suction lines and chilled-water pipework, supplied in the bore sizes that match common air conditioning line sets.
- Reduces heat gain and condensation on cold lines
- Cut to length on site or pre-cut for assembly
- Pairs with tape wrapping at joints and terminations
Where Installation Material Fits in the Project
These items are consumed at the end of the mechanical installation, after piping, evacuation and charging. Their condition at handover is visible to the end user, so dimensional consistency and surface finish matter as much as the mechanical parts they protect.
| Project Stage | Installation Material Used | What We Confirm |
|---|---|---|
| Line-set routing | Insulation tube over suction line | Bore size, wall thickness, coil length |
| Bundling and dressing | PVC non-adhesive tape | Roll width, roll length, pack quantity |
| Joint sealing | Tape over insulation butt joints | Compatibility with tube outer diameter |
| Handover and inspection | Finished wrapped line set | Visual acceptance criteria and packing |
Material and Specification Variables
Selection is driven by the pipe it protects and the environment it sits in. For insulation tube, the controlling variables are the copper tube outer diameter, the required insulation wall, the operating temperature range and whether the line is exposed to UV or abrasion. For tape, the controlling variables are roll width, roll length, tensile behaviour during wrapping and how the surface behaves at low temperature.
- Bore and wall: matched to the suction line and liquid line diameters used on the unit.
- Thermal performance: insulation value must hold across the full evaporating temperature range of the system.
- Moisture behaviour: closed-cell structure resists water uptake on cold lines.
- Mechanical protection: tape wrap guards insulation against chafing during pulling and routing.
- Fire and smoke requirements: relevant where the installation passes through occupied building spaces.
Our Manufacturing and Quality Position
Kingcool operates as an enterprise combining industry and trade. Our capacitor production runs on advanced high-precision slitting and winding equipment with an annual capacity of 10 million metalized film capacitors, supported by testing equipment that monitors the process in real time. That same discipline in incoming inspection, dimensional checking and packing control applies to the accessory lines we supply.
Products are exported to more than a dozen countries across the Middle East, Africa, South America and Southeast Asia. Because each employee works directly with the market, fragmented and personalised requests are handled quickly rather than pushed through a layered approval chain.
Ordering Installation Material With the Rest of the BOM
Installation material is rarely ordered alone. Most of our customers combine it with the wider refrigeration and air conditioning range so that one container covers a complete service or assembly requirement.
- Refrigeration Parts — copper tube, brass and copper fittings, filter driers, oil separators, vibration absorbers, manifold gauges and condensate drain pumps.
- Air-Conditioner Parts — compressors, motors, sensors, brackets, charging valves and capillary tubes.
- Refrigerator Parts — thermostats, defrost components, filter driers and control boards.
- Capacitors produced in-house, including the CBB65 motor run series for compressor and fan duty.
Packing, Documentation and Delivery Scope
Installation material is bulky relative to its value, so packing efficiency directly affects landed cost. We consolidate rolls and tube coils into cartons sized for pallet build-up, label each carton with the item code and quantity, and prepare a packing list that matches the commercial invoice line by line.
- Carton and pallet configuration agreed before production
- Item code, description and quantity on each carton label
- Packing list, invoice and shipping documents issued as one set
- Mixed-item consolidation with other Kingcool product lines
Information We Use to Configure Your Solution
A quotation that can be produced without follow-up questions needs a small set of inputs. The list below is what our team works from when preparing a configuration and price for installation material.
| Input | Why We Need It |
|---|---|
| Item list with quantities | Sets the production and packing plan |
| Tube bore and wall thickness | Matches insulation to the line set |
| Tape roll width and length | Defines consumption per installation |
| Operating temperature range | Confirms material suitability |
| Destination port and Incoterm | Determines packing and freight basis |
| Branding or label requirements | Applied at the packing stage |
Frequently Asked Questions
What installation material does Kingcool manufacture and supply?
We supply AC cable ties tape made from plasticized PVC non-adhesive material and air conditioning insulation tube, both held as standard items within our refrigeration parts range. They are ordered alongside copper tube, fittings, drain pumps and control components so a project receives one consolidated shipment.
How do we choose the right insulation tube bore for a line set?
The bore is matched to the copper tube outer diameter on the suction and liquid lines, and the wall thickness is set by the required thermal performance and the ambient conditions along the route. Give us the line diameters and the operating temperature range and we will confirm the matching tube size.
Can installation material be combined with other Kingcool products in one order?
Yes. Installation material is normally consolidated with refrigeration parts, air conditioner parts, refrigerator parts and our in-house capacitors. Mixed-item packing is planned before production so carton sizes and pallet build-up suit the full order.
What quality control applies to these consumable items?
Incoming material is checked for dimensions and surface condition, and finished goods are inspected before packing. Our capacitor production uses high-precision slitting and winding equipment with real-time process monitoring, and the same inspection discipline governs the accessory lines we supply.
Which markets do you currently serve?
Our products are exported to more than a dozen countries across the Middle East, Africa, South America and Southeast Asia. We exhibit at international refrigeration events, including Shanghai, Beijing and Sao Paulo, and work directly with distributors, contractors and OEM buyers.
How quickly can you respond to a quotation request?
We reply within 12 hours on working days. Send the item list, quantities, tube bore and wall, tape roll dimensions, destination port and any labelling requirements, and our team will return a configuration and price basis for review.
